双螺条粉体混合机是根据国外技术开发的新产品，具有混合结构特殊、速度快、混合均匀等特点.与物料接触部分均为不锈钢制作，抛光处理，不粘料,螺条由内外两层制成，内部螺条将物料推到端面,外部螺条将物料移到中心位置，两者使物料高速辐射运动,达到迅速混合的目的。设备可带冷热夹套,电机可调速或防爆，材质可根据物料选择,以满足不同用户的要求。
双螺条粉体混合机是根据国外技术开发的新产品，具有混合结构特殊、速度快、混合均匀等特点.与物料接触部分均为不锈钢制作，抛光处理，不粘料,螺条由内外两层制成，内部螺条将物料推到端面,外部螺条将物料移到中心位置，两者使物料高速辐射运动,达到迅速混合的目的。设备可带冷热夹套,电机可调速或防爆，材质可根据物料选择,以满足不同用户的要求。
Vacuum rake dryer major components of
1, shell 2, harrow teeth 3, a feeding device
4, unit 5, crushing rod 6, sealing device
7, stirring shaft 8, transmission
Vacuum rake dryer with a simple structure, easy operation, long life cycle, stable performance and reliable, steam consumption is small, applicability, product quality is good, especially for non-high temperature, flammable, easily oxidized at high temperature paste materials like dry, the aircraft long-term use by the users proved to be a good drying equipment.
Principle was dried material from the shell on the side is the middle in the ever-positive and negative rotation of the rake teeth stirring, the material axial walking back and forth, with the surface of the shell wall in contact constantly updated by indirect steam heating, uniform mixing rake teeth , smash smash rods, so that material inside the water evaporation, in a vacuum under the action of the system, so that internal moisture has been dried materials and surface water a more favorable discharge, vaporization of water through the dry-type dust collector, wet filter, condenser, vacuum pump exit from shorting.
Unserviceable stores:
| Slurry | Paste | Below 100 mesh material |
| A variety of pigments, soil-like material | Filtration | Centrifuge and filter |
| Soda ash detergent, alkali rock | Starch, dyes | Paints, clay |
| Gray etc. | Clay etc. | Cement etc. |
Be applied under the appropriate conditions:
| Below 100 mesh material | Solution |
| Synthetic fibers, crystalline | Vacuum liquid, emulsion |
| Gan Achillea films, minerals and | Suspension |
Model and technical parameters:
| The main parameters Model | Nominal Capacity (m3) | Heat transfer area(m2) | A loading (m3) | Absolute working pressure | Operating Temperature (K) | Spindle Speed(rpm) | Material | Weight (kg) | Power (KW) | Dimensions | |
| Cylinder diameter (MPa) | Jacket diameter(MPa) | ||||||||||
| XPG0.5 | 0.5 | 1.86 | 0.2 | 0.021 | 0.686 | 435 | 15-20 | Main:3 | |||
| Secondary:5.5 | |||||||||||
| XPG1 | 1 | 6 | 0.75 | 0.021 | 0.686 | 435 | 9 | A3 | 3400 | 5.5 | 3700 ×945 ×3270 |
| 1Cr18Ni9Ti | 3300 | ||||||||||
| XPG2 | 2 | 8 | 1.2 | 0.021 | 0.588 | 425 | 9 | A3 | 4900 | 11 | 4570 ×1130 ×3455 |
| 1Cr18Ni9Ti | 4800 | ||||||||||
| XPG3 | 3 | 11.5 | 1.8 | 1.021 | 0.588 | 425 | 9 | A3 | 6400 | 15 | 6076 ×1130 ×2980 |
| 1Cr18Ni9Ti | 6300 | ||||||||||
Technical Support：YOUWEI
